TerraSystem floor coatings are seamless, liquid-tight resin systems for floors under mechanical and chemical load: industrial halls, car parks, commercial kitchens, laboratories and antistatic areas. From a 0.15 mm transparent seal to a 3 mm self-levelling coating, each system is chosen for the substrate and the load; installed by TerraSystem's own technical crew.
A floor coating is a resin layer applied directly to concrete or screed. It seals the surface without joints and makes it resistant to abrasion, oil and chemicals, and easy to clean.
TerraSystem systems are based on epoxy (EP), polyurethane (PU) or polyurea. They are built up in two to four layers; anti-slip systems are broadcast with colour flakes or quartz sand to reach the required slip resistance.
Seamless and impermeable to water
High abrasion and impact resistance, good chemical resistance
Available in many colours
There is a suitable system for every load.
Production and storage halls with medium to high mechanical load.
Resistant to car traffic, mineral oils and fuel; anti-slip.
Anti-slip R11–R12 systems for wet and greasy floors.
Chemical resistance and an easy-to-clean surface.
Pharmaceutical plants, operating theatres and storage of explosive goods.
Flexible, UV-stable systems for pedestrian traffic on concrete or asphalt.
Transparent concrete-look seal, matt or glossy.
Highly abrasion-resistant systems for heavy foot traffic, indoors and outdoors.
Seamless: no joints where dirt and liquids collect
High abrasion and impact resistance
Good chemical resistance; resistant to oil and fuel in garages
Anti-slip classes R10, R11 and R12
Antistatic system with an earth resistance below 10⁶ Ω
Fast-curing polyurea and UV-stable systems for outdoor areas
Many colours and decors
Installed by TerraSystem's own technical crew
All systems: adhesive strength > 2 N/mm² (EN 1542). Abrasion: Taber, friction wheel H22, 1,000 cycles (EN ISO 5470-1). Substrate: dry concrete or mineral screed.
| System | Build-up | For | Key values |
|---|---|---|---|
| Standard self-levelling EP | 2 layers, 1–3 mm | industrial floors, storage halls, workshops, laboratories | compressive ≈ 100 MPa; abrasion < 30 mg |
| Standard EP topcoat | 2 layers, ≈ 1 mm | storage halls, workshops, farms, food & beverage | compressive ≈ 40 MPa; abrasion < 60 mg |
| EP topcoat ECO | 2 layers, water-based | cellars, garages, technical rooms; also on mastic asphalt and magnesia screed | compressive ≈ 55 MPa; abrasion < 100 mg; EC1 plus |
| Anti-skid EP R10 | 4 layers, 2–3 mm, colour flakes | entrances, bathrooms, kitchens, shops | R10; compressive ≈ 180 MPa; abrasion < 80 mg |
| Anti-skid EP R11 V4 | 3 layers, 2–3 mm, quartz 0.3–0.8 mm | wet areas, kitchens, laboratories, laundries | R11; compressive ≈ 180 MPa; abrasion < 60 mg |
| Anti-skid EP R12 V4 | 3 layers, 2–3 mm, quartz 0.7–1.2 mm | cold stores, dining areas, waste water areas | R12; compressive ≈ 180 MPa; abrasion < 80 mg |
| Antistatic EP-ECF | 4 layers + copper tape, 2–3 mm | pharmaceutical industry, operating theatres, storage of explosive goods | R < 10⁶ Ω (DIN IEC 61340-4-1); compressive ≈ 95 MPa |
| Polyurea fast top coat | 2 layers, ≈ 0.6 mm, UV-stable | garages, repair halls, balconies, outdoor platforms | fast curing; abrasion < 70 mg |
| Peatonal EP/PU | ≈ 2 mm, flexible, UV-stable | paths, terraces, balconies on concrete or asphalt | abrasion < 75 mg |
| Betonlook PU | 0.15–0.25 mm, transparent, water-based | offices, showrooms, lobbies, gyms | abrasion < 50 mg; AgBB-compliant formulation |
Source: Terra System GmbH system data sheets. Reaction to fire Efl (EN 13501-1) for the systems where it is stated.
Area, use (traffic, chemicals, wet areas) and substrate; photos are enough to start.
Choice of system, anti-slip class, colour and layer thickness.
A quote based on area, substrate preparation and system.
TerraSystem's own crew prepares the substrate and applies the system layer by layer.
Klar Chem is the authorized distributor of Terra System GmbH in 24 countries. We are your contact for system selection, technical documents, samples and quotes. On every project the installation is carried out by TerraSystem's own technical crew, so workmanship and warranty come from the manufacturer.
It depends on the load and the use: self-levelling EP for industrial floors, anti-slip R10–R12 for wet and greasy areas, EP-ECF for antistatic areas, polyurea or Peatonal outdoors. Tell us the use and we will recommend a system.
Epoxy systems are hard and tough with high compressive strength, for heavy indoor loads. Polyurea cures fast and is UV-stable, which suits garages, balconies and outdoor platforms.
Yes. Garage systems resist car traffic, mineral oils, fuel and tyre marks and meet anti-slip requirements.
Anti-slip classes according to DGUV 108-003: the higher the number, the greater the slip resistance. R12 is used, for example, in cold stores and waste water areas.
It depends on the area, substrate condition and system. Send us the area, use and photos and we will prepare a quote.
TerraSystem's own technical crew on every project. Klar Chem is your contact for system selection, quotes and coordination.
Tell us the area, use and substrate. We will recommend the right system and send you a quote.
